SEDEMAC
TM
Format No: SED-OHA-QF-06, Rev 01
NOTE: This document is a property of SEDEMAC Mechatronics Pvt. Ltd. It shall not be communicated to or copied by anyone without the written permission of the company.
This document is controlled when it is printed.
Page 7 of 19
1
Introduction
This document describes necessary information for operating SEDEMAC's CB12XX series battery
chargers. It is specially designed to meet the charging characteristics of lead acid genset
batteries. The
chargers comprise of high grade electronic components to ensure reliable and efficient performance.
1.1
Key Highlights of the Product
•
Automated three stage battery charging features is provided to ensure longer battery life
•
Advanced switch mode supply design is responsible for higher output efficiency (>85%)
•
Manual boost mode feature results in fast charging
•
Built-in current and voltage protection circuit which gives effective protection against input over
voltage, short circuit, output over current, reverse battery protection, Input under-voltage
shutdown, etc.
•
LEDs for status diagnostic support
•
Can be used as Switched Mode Power Supply (SMPS) in manual boost mode
1.2
Product Variants
•
CB1205 (Suitable for 12V lead acid battery with rated current 5A)
•
CB1210 (Suitable for 12V lead acid battery with rated current 10 A)
2
Charging Principle
Figure 1: Charging characteristics graph
