Sedatelec Premio 10 moxa, User Manual, Page: 32 / 34

32/34
A
PPENDIX
5: E
LECTROMAGNETIC COMPATIBILITY AND MANUFACTURER
’
S
STATEMENT
The Premio 10 moxa is designed for use in the electromagnetic
environment specified by the EN60601-1-2 2014 norm . Consequently, it
must not be used in an environment polluted by non-standard
electromagnetic emissions. The client or user of the Premio 10 moxa
should ensure it is used in such an environment
.
The
Premio 10 moxa
uses RF energy for internal operation only. As a
result, its RF emissions are very weak and are not likely to interfere with a
nearby electronic appliance.
The Premio 10 moxa is for use in every type of establishment, including in
homes and premises that are directly connected to the public low voltage
electricity network, which provides residential buildings with power.
The Premio 10 moxa is designed for use in an electromagnetic
environment in which RF disturbances are controlled. The client or user of
the Premio 10 moxa can prevent electromagnetic interference by
maintaining a minimum distance between portable RF communication
equipment and the Premio 10 moxa, as recommended below, depending
on the maximum power emitted by the equipment concerned.
Portable or mobile RF telecommunication equipment must not be used
near the
Premio 10 moxa,
including near the main case and the cables.
Electrostatic shock:
The floors must be made of wood, concrete or ceramic tiles. If the floors
are covered with synthetic material, the relative humidity must be at least
30%.