Sedatelec Premio 10 moxa, User Manual, Page: 14 / 34

14/34
T
URNING THE APPLIANCE
O
N
/ O
FF
When you plug-in the Premio 10 moxa , a green
diode lights up on the power supply case,
confirming it is working properly.
Press the O/I button (an orange diode lights up
on the
Premio 10 moxa
). Wait about 5 seconds
until the emitter reaches operating
temperature.
Pressing again stops emission.
You do not have to turn off the
Premio 10 moxa to move from one
zone to another. However, as heating does not take long, there is no
point in leaving it on when it is not in use.
Turning the appliance on and off can be done with or without the
Concentrator attached.
The Concentrator can be added or removed at any time, using basic care
if it is very hot.
The Premio 10 moxa is programmed to automatically stop after 10
minutes of uninterrupted operation. The appliance can be turned back on
immediately.
Orange
diode
O/I