|
2
Securview Victory Series
Important Safeguards and Warnings
Electrical safety
•
All installation and operation here should conform to your local electrical safety codes.
•
Check if the power supply is correct before operating the device.
•
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated DC
12V or AC 24V in the IEC60950-1. (Power supply requirement is subject to the device label).
•
Install easy-to-use device for power off before installing wiring, which is for emergent power off when necessary.
•
Prevent the line cord from being trampled or pressed, especially the plug, power socket and the junction.
•
Note:
Do not connect these two power supplying sources to the device at the same time; it may result in device damage!
•
We assume no liability or responsibility for all the fires or electrical shock caused by improper handling or installation.
•
We are not liable for any problems caused by unauthorized modification or attempted repair.
Environment
•
Don’t aim device at strong light (such as lighting, sunlight and so on) to focus; otherwise it may cause overexposure (It is not
the device malfunction), which will affect the longevity of CCD or CMOS.
•
Transport, use and store the device within the range of allowed humidity and temperature.
•
Don’t keep the device in a place which is wet, dusty, extremely hot, and extremely cold and with strWong electromagnetic
radiation or unstable lighting.
•
Do not allow water and other liquid falling into the camera in case that the internal components are damaged.
•
Do not allow rain or damp to the indoor device in case fire or lightning may occur.
•
Keep the sound ventilation in case of heat accumulation.
•
Pack the device with standard factory packaging or material with same quality when transporting the device.
•
Heavy stress, violent vibration or water splash are not allowed during transportation, storage and installation.
Warning
•
Modify the default password after login in order to avoid being stolen.
•
Use the standard accessories provided by manufacturer and make sure the device is installed and fixed by professional
engineers.
•
Prevent the device surface from the radiation of laser beam when using laser beam device.
•
Do not provide two or more power supply modes for the device, otherwise it may cause damage to the device.
Statement
•
Refer to the actual product for more details; the manual is just for reference.
•
The manual will be regularly upgraded according to the product update; the upgraded content will be added in the manual
without prior announcement.
•
Contact the supplier or customer service if there is any problem occurred when using the device.
•
Contact the customer service for the latest procedure and supplementary documentation.
•
There may be deviation between the actual value of some data and the value provided in the manual due to the reasons
such as the real environment is not stable and so on. Refer to the company’s final explanation if there is any doubt or dispute.
•
The company is not liable for any loss caused by the operation which is not followed by the manual.
