35
3. Now select
Brightness Control
from the available options and use the
“-” and “+“icons to adjust the brightness as needed.
NOTE:
When you are done, you can press the back arrow located to the
right of the Brightness Setting label to go back to the previous screen
or you can switch between cameras by tapping on the “<” & “>” icons to
begin configuring the next camera.
Motion Detection recording can be enabled / disabled on a “Per Cam-
era” base and can be activated / deactivated by following the steps
below.
NOTE:
Each motion detected recoding event is fixed at 2 minutes per
event, unless motion is continuously being detected.
1. Tap the
Menu
icon on the receiver and then tap on the
Settings
icon.
Motion Detection