8
Now that you have your mounting position set, run the excess power cable so that it doesn’t
disturb the drivers view or steering wheel while driving. This can be done by gently tucking
the cable into the seams of your vehicles upholstery and side panels. While hiding the cable
remove the adhesive backing of the GPS dongle (receiver) and stick it to your windshield.
Note:
GPS connection time will vary depending on the signal strength location and dongle posi-
tion. Please wait for the GPS connected voice prompt before moving the vehicle.
The SecurityMan
SM CARCAMGPS
app can be found on both IOS and Android platforms by
simply scanning the corresponding QR code below or searching for it in the Apple App-Store or
Google Play- Store.
The following steps will guide you on how to connect to the camera using your smart phone.
Please make sure you visit the basic operations section of the user’s manual for instructions on
how to sync events and other commonly used features.
With the GPS power cable connected to both the USB adapter and camera, turn your vehicle
on and the camera will automatically turn on and begin recording (flashing
red
LED).
Note:
In most vehicles, the camera will automatically turn on/off whenever the car does be-
cause the power to the cigarette port is controlled by the ignition. *Vehicles with cigarette ports
that are always on will have to manually turn the camera on/off by unplugging the USB end of
the GPS Power cable from the USB power adapter to prevent the cars battery from draining.
IPHONE
ANDROID
APP DOWNLOAD
CONNECTING TO YOUR CAMERA
