19
4.4 IR SET
IR MODE: Mode has auto, small light on, big light on, manual,
and off selectable
TESTING TIME: 2-15s selectable
ILLUMINATION ON: Its range is 0-25 level. In the IR
mode of auto,
when the “ILLUMINATION ON” is lower
than ambient light, the picture turns to color and IR lamps
turn off
. When “ILLUMINATION ON” is higher than
ambient light, the picture turns to night and IR lamps
open.
IR SWITCH ZOOM: When zoom value reaches to the demanded setting, the IR LEDs with auto
switch from near illumination to far illumination, zoom value option from 01-23.
4.5 Display Set
ID : Displays the cam
era’s address.
ZOOM: Displays the zoom level.
P/T: Displays the Pan and Tilt degrees.
ACT: Displays the current action, such as set
preset, call preset, 360°scan. ON or OFF etc.
TIME: Displays the current time on screen.
IR: “
☀
” indicates that the IR LEDs are lit. The
status can be seen at the top left corner of the screen.
The IR dis
play progress bar “ ” will be filled
gradually along with the illumination level.
TEMP: Display the inside temperature of the
dome.
4.6 Time Set
DATE: Set the system date.
TIME: Set the system time.
SCHEDULE:
Action: Choose preset 1-8, A-B scan, 360
°
scan,
guard tour preset, pattern, no action selectable.
Example of Schedule:
1: 8 scheduled events can be set. First, select the schedule to
<TIME SET>
DATE
2000-01-01
TIME
00:00:00
<SCHEDULE>
SAVE
EXIT
<SCHEDULE>
START END ACT
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
00:00:00 00:00:00 NONE
SAVE
<DISPLAY SET>
ID
ON
ZOOM
ON
P/T
ON
ACT
ON
TIME
OFF
IR ON
TEMP ON
EXIT
CANCEL
<IR SET>
IR MODE AUTO
TESTING TIME 08S
ILLUMINATION ON 05L
IR SWITCH ZOOM 04L
EXIT
