17
PATTERN ID: Factory default is 1.
Select the pattern to be edited. There are 4 patterns.
CALL PATTERN: Call (run) the pattern which is
currently selected.
<PATTERN SET>
The figure at left shows the screen when the camera is ready to
record a pattern.
“XXX” is the quantity of operator’s instructions used so far. The
maximum amount of instructions available to record is 512.
Remark:
The precision of pattern is associated with the system
settings and module of the camera. When using the pattern, it
is recommended to turn off the privacy zone and unnecessary
display function.
4.2.5 Privacy Zone (Unused on this model camera)
MASK NO.: Select the mask number. It
depends on the module supported.
SET MASK: For detailed steps, please refer to the
“Example of Setting Mask 1”.
MASK: ON and OFF are selectable.
Example of Setting Mask 1
1: Move the cursor to MASK NO, which is be selected
by pr
essing the “right key”.
2: Press the “up and down” keys in the keyboard to edit the
mask number, which is be entered by pressing the
right key. “-” means selecting this mode, while “ ”, hourglass
symbol, means editing this mode.
3: Move the cursor to <SET MASK> and press right key to set
the position of privacy zone. See the figure on the left below.
4: Move the joystick to aim at the object. Use the ZONE WIDE
and ZONE TELE keys in the keyboard to adjust the size of
picture. And use iris OPEN and CLOSE keys to adjust the size
of mask. Call preset 1 to save and exit and call preset 2 to exit
directly.
Remark:
The mask size is better more than double the target
size. Setting the mask is associated with the pitch angle which
is advised to be equal to or less than 45°.
<PATTERN>
PATTERN ID 1
CALL PATTERN
<PATTERN SET>
EXIT
<PATTERN>
PATTERN ID 1
CALL PATTERN
<PATTERN SET>
XXX/512
PRESET 1: SAVE
PRESET 2: BACK
<DOME SET>
<PRESET>
<SCAN>
<GUARD TOUR>
<PATTERN>
<PRIVACY ZONE>
<OTHER>
<ALARM >
EXIT
<PRIVACY ZONE>
MASK NO 01
MASK
<SET MASK>
EXIT
<PRIVACY ZONE>
MASK NO 01
MASK
ON
<SET MASK>
PRESET 1: SAVE
PRESET 2: BACK
