15
4.1 System Information
SYSTEM INFORMATION
PROTOCOL: Displays the protocol of the dome.
Baud rate: represents the communication
Information; 2400 is the baud rate, which
can be changed via the DIP switches or
software the available baud rates are: 1200, 2400,
4800 and 9600.
“N.8.1” represents the Check bit,
Data bit and Start bit.
DOME ID: This is the address number of the dome.
The range is 000-255.
MODULE: Displays the brand and model of the
installed camera module.
VERSION: Displays the current operating system
<SOFT ID SET>
DEVICE ID: Used to distinguish this dome from the
ID of other domes.
CHECK ID: Enter the device ID above into this field
to enable address changes for just this camera.
TARGET ID: Enter the new address you wish to
assign to this camera. It will be effective
immediately after it is changed.
<PASSWORD SET>
PASSWORD 1: Enter the password, PASSWORD 2: Re-enter the password
4.2 Dome Set
4.2.1 Preset
PRESET NO: Select the preset number to be SET
or CALLED.
CALL PRESET: Calls the preset number selected
above.
<SET PRESET: Writes the current camera position
into the preset location entered above.
<MAIN MENU>
<SYSTEM INFORMATION>
<DOME SET>
<CAM SET>
<IR SET>
<DISPLAY SET>
<TIME SET>
<LANGUAGE>
<RESET>
EXIT
<SYSTEM INFORMATION>
PROTOCOL
PELCO-D/P
BAUD RATE
2400.N.8.1
DOME ID 001
MODULE
VERSION
MAX SPEED 300
<SOFT ID SET>
<PASSWORD SET>
CANCEL
CANCEL
<SOFT ID SET>
DEVICE ID
CHECK ID
TARGET ID
BAUDE RATE
SAVE
EXIT
<PRESET>
PRESET NO
001
CALL PRESET
<SET PRESET>
EXIT
