v1.0 12/15/11
24
C = SEQUENCE
. Move the cursor to SEQUENCE and press IRIS OPEN to enter the
CRUISE / SEQUENCE submenu.
A1 = SEQUENCE NO
. Move the cursor to SEQUENCE NO. and press IRIS OPEN to
enter the setup mode. Move the joystick up or down to select the number the press
IRIS OPEN to confirm.
B1 = TITLE
. Move the cursor to TITLE and press IRIS OPEN to enter the
SEQUENCE title edit mode.
C1 = START
. Move the cursor to START and press IRIS OPEN to initiate the current
cruise / sequence.
D1 = SEQUENCE SET
. Move the cursor to SEQUENCE SET and press IRIS OPEN
to enter the setup mode. Move the cursor to EDIT and press IRIS OPEN to enter the
edit mode. Move the joystick right or left to select the desired parameter
When < > is on NO. move the joystick up or down to select the number of the
preset in a sequence. There are up to 32 presets in a single cruise / sequence.
When < > is on PRESET move the joystick up or down to select the preset
number to be added to the sequence.
When < > is on INS move the joystick up or down to select the edition mode as
“insert”, “ok” and “delete”.
Press IRIS CLOSE to quit.
E1 = DELETE
. Move the cursor to DELETE and press IRIS OPEN to delete a sequence.
D = PATTERN
. Move the cursor to PATTERN and press IRIS OPEN to enter the PATTERN
submenu.
A1 = PATTERN NO
. Move the cursor to PATTERN NO and press IRIS OPEN to enter
the PATTERN NO edit mode. Move the joystick up or down to select the desired pattern
number. Press IRIS OPEN to confirm
B1 = TITLE
. Move the cursor to TITLE and press IRIS OPEN to enter the PATTERN edit
title mode.
C1 = START
. Move the cursor to START and press IRIS OPEN to start the current
pattern.
D1 = SET
. Move the cursor to SET and press IRIS OPEN to enter the pattern set mode.
The camera will display “Press Iris Open to Confirm…” Move the joystick to the desired
position and press IRIS OPEN to confirm.
E1 = DELETE
. Move the cursor to DELETE and press IRIS OPEN to delete the current
pattern.
