Security Tronix ST-PTZ480-22X, Installation Manual

Page: 6 / 15

V2.0 5/1412
6
High Speed Dome
Ver
：
2.20
PELCO D/P
BPS
：
2400
ID
：
001
Tile Ref OK
Pan Ref OK
c.
Connect power supply’s 120VAC input to a suitable AC power outlet.
d. Make an RS485 connection between the camera and the PTZ controller. Ensure the
connections at the PTZ controller and camera have the same polarities.
6. FUNCTIONS and OPERATION
Basic Operation
After powering up the ST-PTZ480-22X
’s version number,
communication protocol, baud rate and address will be
shown on the monitor. At the same time, the system will
check the pan and tilt status and display the results. The
information will disappear once operations begin.
The table below is a quick guide to the camera’s basic operations using a PTZ Controller:
Function Operation
Pan/Tilt Move joystick to left, right, up, and down
Menu Confirmation Press [IRIS OPEN]
Menu Cancellation Press [IRIS CLOSE]
Zoom In Press [TELE] or rotate joystick clockwise for the desired image.
Zoom Out Press [WIDE] or rotate joystick counter clockwise for the desired image.
Focus Far Press [FAR] until there is a clear image
Focus Near Press [NEAR] until there is a clear image
Auto Focus
The dome reverts to auto focus mode when the joystick is moved left, right, up, down or
turned. For manual focus use the Focus Near and Focus Far keys.
Enter Programming
Menu
Call preset 95 or user defined preset. Please refer to short-cut menu.
Return Zero Pan/Tilt
Point
Call preset 34 or user defined preset. Please refer to short-cut menu.
Start Pan Scan Call preset 99 or user defined preset. Please refer to short-cut menu.
Auto Flip Call preset 33 or user defined preset. Please refer to short-cut menu.
Pan Scan Limit
Left limit: Call preset 92 or a user-defined preset. Please refer to short-cut menu.
Right limit: Call preset 93 or a user-defined preset. Please refer to short-cut menu.
Run L/R Scan
Call preset 99 or a user-defined preset. Please refer to short-cut menu.
Call Tour 1 Call preset 96 or a user-defined preset. Please refer to short-cut menu.
Call Tour 2 Call preset 97 or a user-defined preset. Please refer to short-cut menu.
Call Tour 3 Call preset 98 or a user-defined preset. Please refer to short-cut menu.