3
CVR/NVR Configuration
NETWORKING THE CVR/NVR
In order for P2P to work, you need to make sure the CVR/NVR is
connected to your network and eventually connected to an internet
connection. (CVR/NVR directly connected to your Modem/Router or
CVR/NVR connected to a switch/router which is then connected to
your modem). You can automatically get an assigned IP address from
your router by following the steps below:
From the
MAIN MENU
, select
NETWORK
in the
SETTING
section, then
select
TCP/IP
on the left side of the window:
If the local network is DHCP-enabled, select
DHCP
in the
MODE
row,
then click
APPLY
and then
SAVE
at the bottom right of the screen.
Next, reboot the CVR/NVR.
Once the CVR/NVR has rebooted, navigate back to the
NETWORK
MENU
, then change
MODE
to
STATIC
to prevent accidental
