6
Setting a Tour
After
PRESET
locations have been set, enter the
OSD MENU
, then use
the joystick or up/down arrows to navigate to
FUNCTION SETTING
and
press
OPEN
to enter. Next, navigate to
TOUR
and press
OPEN
.
Using the controller’s joystick or arrow buttons, move left or right at
TOUR NO
to select the desired tour to edit, then navigate to SETTING
and press
OPEN
.
Use the joystick or arrow buttons to navigate tour positions. Up and
down will cycle through the positions currently displayed on screen,
and left and right will cycle through pages of positions.
Once a tour position is selected (indicated by the symbol), press
OPEN
to edit the tour position’s parameters. Move the joystick left
and right to choose which parameter to edit, or up and down to
change parameter values.
Summary of Contents for HD-COAXINATOR ST-HD-PTZ-2MP
Page 10: ...9 ...
Page 11: ...10 ...
Page 12: ...11 Version 1 0 3 25 15 2015 North American Cable Equipment ...
