25
960-Hour Time Lapse Video Cassette Recorder
Normal Playback
Normal Playback
1
Turn on the power to the TV monitor.
2
Load the video cassette tape.
3
Press the REC/PLAY SPEED
(or
) button to
select the playback speed.
• The selected playback speed is displayed on the display panel.
• A tape recorded with SP heads can be played in 2 / 12 /
24 / 36 / 48 / 72 / 96 / 120 / 168 / 240 / 360 / 480 / 720
/ 960 Hour.
4
Press the PLAY button.
• Playback starts.
• If necessary, adjust the tracking to eliminate the noise
from the picture.
5
To stop playback, press the STOP button.
• To advanced or rewind the tape, press the FF/CUE or
REW/REVIEW button.
Tracking Control
If there is noise in the image during playback,
1
While looking at the playback picture, press and
hold the TR button to minimize the noise.
2
If it cannot be minimized, press the TRACKING -
button.
3
Press the PLAY button in the playback mode.
Audio Playback
Audio playback is only possible in 2-hour, 12-hour and
24-hour modes.
The playback speed has to be the same as the recording
speed, for normal playback of the audio.
For a tape recorded in 2-hour, 12-hour, and 24-hour
modes, to playback the audio, press the AUDIO ON
button after pressing the PLAY button. “A” will be
displayed to the left of the playback speed on the display
panel. Press the AUDIO ON button again to remove “A”.
✔
• A slow motion effect or
accelerated playback
effect can be achieved by
using a slower or faster
playback speed than the
speed used for recording.
✔
• Noise will appear in the
image when audio
playback is used in
12/24-hour mode.
24
960-Hour Time Lapse Video Cassette Recorder
Autorepeat Recording
Autorepeat Recording
The same tape can be recorded over many times. Please
note that if you activate this feature you will lose the
entire previous recording.
1
Press the Menu, SHIFT
, SHIFT
button in
sequence to display the REC MODE SET menu.
2
Press the SHIFT
button to make the arrow mark
(
) point to Repeat Rec Set.
3
Press the SHIFT
button to set the desired
autorepeat recording mode.
NO . . . . . . Autorepeat recording doesn’t take place.
YES . . . . . Autorepeat recording takes place.
“R.REC” will light on the display panel.
4
Press the Menu button two times, the normal screen
is displayed.
• The setting procedure is now complete.
5
Press the REC button.
• Recording will start. When the tape’s end is reached,
the VCR will rewind it to the beginning regardless of
the counter memory, and recording will resume.
✔
• If during autorepeat
recording there is an
alarm trigger, “
“ is
displayed on the display
panel and alarm
recording will take place.
Autorepeat recording will
continue after alarm
recording has completed
its programmed duration.
