Security Command XRSuper6, User Manual

Page: 9 / 39

XRSuper6 Introduction 5
Special Security Command Tones
Your keypad also contains a small speaker that allows it to alert
you to events as they occur on your system. Below are brief
descriptions of the different tones you will hear from the keypad:
Fire alert: Your keypad may sound a fire tone to alert persons in
the vicinity to the alarm condition. This is in addition to the bell
output from the alarm panel.
Burglary alert: Your keypad may sound a burglary tone to alert
persons in the vicinity to the alarm condition. This is in addition
to the bell output from the alarm panel.
Key press tone: A short beep as you press a key on the keypad.
Prewarn tone: A continuous pulsed tone that sounds when you
open an entry delay door on a system that is armed (turned on)
reminding you to disarm the burglary protection.
Monitor tone: A short tone that sounds for one second whenever
a door or window is opened while you are using the zone monitor
function from the User Menu. See Zone Monitor.
Trouble tone: A steady tone indicating a trouble condition on
your system. Press a Select key to silence the trouble tone.
Zone Activity Check tone: A steady tone indicating no zone activity
has occurred on your system within the programmed period of
time. Press
any key to silence the tone.
What to do when the trouble tone is sounding
You can silence the trouble tone by pressing any one
of the top row Select keys. This only silences the
keypad and does not correct the condition that
originally caused the problem.
Special Security Command Messages
Below are a few examples of the displays you will see on your
keypad.
ALARM
A 24-hour zone, such as a fire or panic zone, or an armed burglary
zone has been faulted. Your system may sound bells or sirens.
ALARM CANCELLED
This message displays when an authorized user cancels an alarm
condition by entering a valid user code and an “Alarm Cancelled”
report was sent to the central station.
TROUBLE
There is a problem with a protection device or component. This
display is accompanied by a description of the problem.
ENTER CODE
The system requires you to enter a personal user code. User
codes can be required for turning your system on (arming), turning
your system off (disarming), and other system options. As you
enter your user code, the keypad display shows an asterisk (*) in
place of each digit pressed.
TRY AGAIN
The system does not recognize the user code that was entered.
Check the user code and try again.
INVALID CODE
The system does not recognize the user code you entered.
SYSTEM TROUBLE or SERVICE REQUIRED
There is an electronic failure in your system. Contact the service
department as soon as possible.
Technical Manuals Online! - http://www.tech-man.com