Security Command XRSuper6, User Manual

Page: 21 / 39

XRSuper6 User Menu 17
Deleting User Codes
1. Access the User Menu.
2. Press the COMMAND key until
USER CODES? displays.
3. Press any one of the Select keys. The keypad displays ADD
DEL CHG .
4. Press the Select key under DEL to delete a user code from
the system. You must have a Master user code level to be able
to delete a user code.
5. At the USER NUMBER: - prompt, enter the user number you
want to delete and press COMMAND. The displays changes to
USER # DELETED .
6. The display then changes back to USER NUMBER: - for you
to delete another user. Press the Back Arrow key twice to
exit the User Menu.
Ambush Codes
Your system may be programmed to allow user number 1 to be an
Ambush code. The Ambush code functions identically to other
codes with the exception that it sends a silent alarm to the
central station. This silent alarm alerts the operator to a duress
situation at the premises and prompts the immediate notification
of the authorities.
Refer to the System Setup section of this guide to see if your
system is programmed for Ambush. If so, do NOT program a code
for user number 1 if you intend to use the Ambush function.
7. The display changes to MASTER? NO YES . Select YES to make
this a Master user level with the authority to access all User
Menu functions.
Select
NO to make this a Standard user level. The following
options can then be selected:
7a.
TEMP CODE NO YES .
Select NO to make this a permanent user code.
Select YES to make this a temporary code that automatically
expires in 7 days. Temporary codes are ideal for guests
or service technicians. You can delete a Temporary user
code at any time before the 7 day active period ends.
7b. ARM ONLY NO YES .
Select NO to allow this user to arm and disarm the system
and access all Standard level functions in the User Menu.
Select
YES to restrict this user to arming only.
(The Arm Only user code can bypass zones not in a normal
condition at the time of arming.)
8. After you have completed making your selections, the
keypad display shows USER # ADDED .
9. Press the Back Arrow key once to add another user or twice
to exit the User Menu.
Technical Manuals Online! - http://www.tech-man.com