manualshive.com logo in svg

Security Command XRSuper6, User Manual

Share
Download
Security Command XRSuper6 User Manual Download Page 12

8

XRSuper6 Arming and Disarming

All/Perimeter System Disarming

Disarming:

 While the system is armed, you can only enter the

premises through an entry/exit delay door without causing an
alarm.  After opening the door, the Security Command

 

keypad

sounds a prewarn tone to remind you to disarm the system.  You
must disarm the system before the prewarn tone expires or an
alarm on the door zone will occur.
During the prewarn tone, the keypad displays 

ENTER CODE:

.  Enter

your user code to disarm the system.

Alarm Display:

 After disarming, the keypad displays any zones

that tripped or any transmission problems that occurred during
the armed period.  All burglary zones are then disarmed and any
bypassed zones are automatically reset.

Disarmed Message:

 The keypad

 

displays 

ALL SYSTEM OFF

 after

the system disarms.

Central Station Report:

 A report of the system disarming can be

transmitted to the central station.  This is optional and can be
programmed for you at any time.

Disarming an All/Perimeter System

1. During the entry delay time, the keypad displays 

ENTER

CODE:

.  Enter your user code.

2. The keypad then displays any zones that went into alarm or any

communication problems that occurred during the armed
period.

3. The keypad next displays 

ALL SYSTEM  OFF

 to confirm the

system is disarmed.

Disarming During an Alarm

1. While the alarm bell or siren is sounding, enter your user

code.  The keypad displays 

DISARM    SILENCE

.

2. Press the Select key under 

DISARM

 to disarm the system and

silence the alarm.
The keypad next displays 

ALL SYSTEM  OFF

 to confirm the

system is disarmed.

3. Press the Select key under 

SILENCE

 to stop the bell or siren

but NOT disarm the system.
If you do not press any Select key, or you press the COMMAND
key, the system will automatically disarm and silence the alarm.

4. If your system is programmed to send an Abort (alarm cancel)

report to the central station, the keypad displays 

ALARM

CANCELLED

.

Note: 

If your system is programmed to send an Abort (alarm cancel)

report to the central station, selecting 

DISARM

 will send this

report to the central station.  Be sure that you want the alarm
message to be cancelled BEFORE deciding to disarm the system.
If you do not want to disarm the system and send the abort
report, press 

SILENCE

 to only turn off the alarm bells.

Technical Manuals Online! - http://www.tech-man.com

Summary of Contents for XRSuper6








































Reviews:

No comments

Brands by name

Popular brands

Load more brands