Security Command Executive XR200 User Manual Download | Manualshive

Page: 14 / 55

background image

10

10

All/Perimeter System Disarming

Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the prewarn tone expires or an alarm on the door
zone will occur.

During the prewarn tone, the keypad displays ENTER CODE:. Enter
your code to disarm the system.

Schedules: If you’ve programmed schedules for your system and
a level 2 code is entered outside of a schedule, the keypad displays
INVALID TIME. This lets the user know that they are disarming
outside of their authorized time. If your system is monitored, an
Unauthorized Entry report is sent to the central station.

Alarm Display: After disarming, the keypad displays any zones that
tripped or any transmission problems that occurred during the
armed period. All burglary zones are then disarmed and any
bypassed zones are automatically reset.

Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.

Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.

Arming and Disarming

Disarming an All/Perimeter System

1. During the entry delay time, the keypad displays ENTER

CODE: . Enter your user code and press COMMAND.

2. The keypad then displays any zones that went into alarm or any

communication problems that occurred during the armed period.

3. The keypad next displays ALL SYSTEM OFF to confirm the

system is disarmed.

Disarming During an Alarm

1. While the alarm bell or siren is sounding, enter your user code

and press COMMAND. The keypad displays DISARM
SILENCE.

2. Press the SELECT key under DISARM to disarm the system

and silence the alarm.

The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.

3. Press the SELECT key under SILENCE to stop the bell or siren

but NOT disarm the system.

If you do not press any SELECT key, or you press the COMMAND
key, the system will automatically disarm and silence the alarm.

4. If your system is programmed to send an Abort (alarm cancel)

report to the central station, the keypad displays ALARM
CANCELLED.

All/Perimeter System Disarming

Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the prewarn tone expires or an alarm on the door
zone will occur.

During the prewarn tone, the keypad displays ENTER CODE:. Enter
your code to disarm the system.

Schedules: If you’ve programmed schedules for your system and
a level 2 code is entered outside of a schedule, the keypad displays
INVALID TIME. This lets the user know that they are disarming
outside of their authorized time. If your system is monitored, an
Unauthorized Entry report is sent to the central station.

Alarm Display: After disarming, the keypad displays any zones that
tripped or any transmission problems that occurred during the
armed period. All burglary zones are then disarmed and any
bypassed zones are automatically reset.

Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.

Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.

Arming and Disarming

Disarming an All/Perimeter System

1. During the entry delay time, the keypad displays ENTER

CODE: . Enter your user code and press COMMAND.

2. The keypad then displays any zones that went into alarm or any

communication problems that occurred during the armed period.

3. The keypad next displays ALL SYSTEM OFF to confirm the

system is disarmed.

Disarming During an Alarm

1. While the alarm bell or siren is sounding, enter your user code

and press COMMAND. The keypad displays DISARM
SILENCE.

2. Press the SELECT key under DISARM to disarm the system

and silence the alarm.

The keypad next displays ALL SYSTEM OFF to confirm the
system is disarmed.

3. Press the SELECT key under SILENCE to stop the bell or siren

but NOT disarm the system.

If you do not press any SELECT key, or you press the COMMAND
key, the system will automatically disarm and silence the alarm.

4. If your system is programmed to send an Abort (alarm cancel)

report to the central station, the keypad displays ALARM
CANCELLED.

«
...
12
13
14
15
16
...
»

Summary of Contents for Executive XR200
























































Reviews:

No comments

Related manuals for Executive XR200

Brand: LONGHORN Pages: 15

Brand: Watts Pages: 10

Brand: Huviron Pages: 56

Brand: JBL Pages: 4

Brand: Silent Witness Pages: 26

Brand: V2 Pages: 12

EAGLE EYES CAMIP12N

Brand: Velleman Pages: 63

Brand: Ziton Pages: 13

Brand: Abus Pages: 2

Brand: Zhejiang Uniview Technologies Pages: 28

Brand: iStorage Pages: 2

NX-108E - Security NetworX NX-4 System

Brand: GE Pages: 20

Brand: UTL Pages: 2

CoolBloC C34 DN 32

Brand: PAW Pages: 24

MIG 270 Separate

Brand: Jasic Pages: 12

Brand: hager Pages: 2

Brand: Abus Pages: 11

Brand: Coby Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands