manualshive.com logo in svg

Security Command Executive XR200, User Manual

Share
Download
Security Command Executive XR200 User Manual Download Page 12

8

8

Area System Disarming

Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the entry delay time expires or an alarm on the
door zone will occur.

During the entry delay time, the keypad displays ENTER CODE:.
Enter your code to disarm the system. Only those areas assigned to
your code will disarm.

Schedules: If you’ve programmed schedules for your system and
a level 2 code is entered outside of a schedule, the keypad displays
INVALID TIME. This lets the user know that they are disarming
outside of their authorized time. If your system is monitored, an
Unauthorized Entry report is sent to the central station.

All or Selective Disarming: After entering your user code, the
system allows you to disarm either all of the areas to which you have
access or just selected areas.  If you choose to disarm all areas, the
system automatically disarms them. If you choose to disarm selected
areas, the names of those areas will be displayed on the keypad.

Alarm Display: After disarming, the keypad displays any zones that
tripped or any transmission problems that occurred during the
armed period. All burglary zones are then disarmed and any
bypassed zones are automatically reset.

Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.

Arming and Disarming

Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.

Disarming an Area System

1. Press the COMMAND key until  ARM     DISARM is displayed.

During entry delay this process starts at step 3.

2. Select DISARM to disarm areas.

3. The keypad displays ENTER CODE: . Enter your user code and

press COMMAND. The keypad displays ALL?     NO  YES.

4. Select YES to disarm all areas authorized for your user code.

Select NO to disarm only certain areas individually. The keypad
then displays the name of each area authorized for your user
code followed by the NO  YES display.

Choose YES to disarm the area displayed.

Choose NO to not disarm and to display the next area.

Note: You can also just press the area numbers you want to disarm

while at the ALL?   NO   YES display. This changes the display
to AREAS: . The area numbers you select appear in the display.
For example: AREAS:     2    4 . Press COMMAND when done.

5. After all areas have been displayed, any alarms or

communication problems that occurred during the armed period
are displayed.

6. If all areas have been disarmed, the keypad next displays ALL

SYSTEM OFF.

Area System Disarming

Disarming: While the system is armed, you can only enter the
premises through an entry/exit delay door without causing an alarm.
After opening the door, the Security Command keypad sounds a
prewarn tone to remind you to disarm the system. You must disarm
the system before the entry delay time expires or an alarm on the
door zone will occur.

During the entry delay time, the keypad displays ENTER CODE:.
Enter your code to disarm the system. Only those areas assigned to
your code will disarm.

Schedules: If you’ve programmed schedules for your system and
a level 2 code is entered outside of a schedule, the keypad displays
INVALID TIME. This lets the user know that they are disarming
outside of their authorized time. If your system is monitored, an
Unauthorized Entry report is sent to the central station.

All or Selective Disarming: After entering your user code, the
system allows you to disarm either all of the areas to which you have
access or just selected areas.  If you choose to disarm all areas, the
system automatically disarms them. If you choose to disarm selected
areas, the names of those areas will be displayed on the keypad.

Alarm Display: After disarming, the keypad displays any zones that
tripped or any transmission problems that occurred during the
armed period. All burglary zones are then disarmed and any
bypassed zones are automatically reset.

Disarmed Message: The keypad displays ALL SYSTEM OFF after
the system disarms.

Arming and Disarming

Central Station Report: A report of the system disarming can be
transmitted to the central station. This is optional and can be
programmed for you at any time.

Disarming an Area System

1. Press the COMMAND key until  ARM     DISARM is displayed.

During entry delay this process starts at step 3.

2. Select DISARM to disarm areas.

3. The keypad displays ENTER CODE: . Enter your user code and

press COMMAND. The keypad displays ALL?     NO  YES.

4. Select YES to disarm all areas authorized for your user code.

Select NO to disarm only certain areas individually. The keypad
then displays the name of each area authorized for your user
code followed by the NO  YES display.

Choose YES to disarm the area displayed.

Choose NO to not disarm and to display the next area.

Note: You can also just press the area numbers you want to disarm

while at the ALL?   NO   YES display. This changes the display
to AREAS: . The area numbers you select appear in the display.
For example: AREAS:     2    4 . Press COMMAND when done.

5. After all areas have been displayed, any alarms or

communication problems that occurred during the armed period
are displayed.

6. If all areas have been disarmed, the keypad next displays ALL

SYSTEM OFF.

Summary of Contents for Executive XR200
























































Reviews:

No comments

Brands by name

Popular brands

Load more brands