User Manual of Network Fisheye Camera
95
the region. If you set the value as 0, alarm is triggered immediately after the object
entering the region.
Sensitivity:
Range [1 to 100]. The value of the sensitivity defines the size of the
object which can trigger the alarm. When the sensitivity is high, a very small
object can trigger the alarm.
Percentage:
Range [1 to 100]. Percentage defines the ratio of the in-region part of
the object which can trigger the alarm. For example, if the percentage is set as
50%, when the object enters the region and occupies half of the whole region, the
alarm is triggered.
Figure 5-54
Intrusion Detection Settings
7.
Repeat the above steps to configure other regions. Up to 4 regions can be set. You
