16
Figure 3-4 Device installation illustration 1
Step 1
Rotate decoration ring clockwise and take it out.
Step 2
Take out installation map in accessories bag, and according to monitoring area, paste it on ceiling or
wall there device will be installed. Dig three hole at the position marked on installation map, and take
out three expansion bolts in accessories bag to insert them into the holes.
Step 3
Adjust position of pedestal, and aim the three holes on device pedestal at the three expansion bolts on
installation surface. Fasten the three self-tapping screws into the three expansion bolts to secure the
pedestal. Loosen the M3X8 cross pan head screw on pedestal, and be careful do not loosen
completely. Now you can adjust position according to monitoring area. After adjustment, fasten the
M3X8 cross pan head screw with sheeting.
Step 4
Rotate decoration ring bottom up and face the three spigots toward the three slots. When you hear a
“Ca” sound, it is rotated in place.
