User Manual
6
NO-RECORD
[ white]: DVR will not record during the time.
NORMAL-RECORD
[ red]: DVR will record continuously.
SENSOR-RECORD
[
S
]
: DVR will record when sensor or motion is triggered.
NOTE:
In order to activate the record schedule, press the
[ ]
record button when
viewing the cameras. After pressing the
[ ]
record button, if schedule is set to
“NORMAL-RECORD” , the DVR will start to record immediately; if the schedule is
set to be “SENSOR-RECORD” , the DVR will not start recording until a motion is
detected by the DVR or an installed sensor is triggered.
5.8 Sensor Setup
CONT: Continuous alarm until any key is pressed..
OFF: No alarm
Note: Sensored Record Time and Alarm On Time are measured in seconds
5.9 H/W Sensor Setup
Note: Sensors and extension alarm are not included with the DVR system and
may be purchased separately.
Note:
For 4-ch DVR, there are 4CH inputs of the
sensor;
For 9-ch DVR, there are 8CH inputs of the sensor.
Sensor Record Time indicates how
long the recording time is when the
motion or sensor is triggered.
Alarm On Time indicates whether the
buzzer will sound when motion is
detected.
HARDWARE SENSOR SETUP:
There are 3 different modes for sensor setting:
NOT INSTALLED, NORMAL-CLOSE and
NORMAL-OPEN. Consult the alarm
purchased for more details on which setting is
required.
SENSORED SETUP
SENSORED RECORD TIME 30
ALARM ON TIME OFF
H/W SENSOR SETUP
MOTION DETECTOR SETUP
( )MOVE (SEL)SELECT (MENU)EXIT
H/W SENSOR SETUP
CHANNEL-1 TYPE:NORMAL-OPEN
CHANNEL-2 NOT INSTALLED
CHANNEL-3 NOT INSTALLED
CHANNEL-4 NOT INSTALLED
( )MOVE (SEL)SELECT (MENU)EXIT
