User Manual
2
Chapter 3: Installation
3.1 Install Hard Disk
NOTICE
: Don’t take out HDD when DVR is running.
Make sure the HDD is set to be MASTER according to the hard drive manual.
(1) Remove the screws around the top cover;
(2) Remove the top cover carefully;
(3) Connect the power cord and data cable to hard disk carefully;
(4) Use the provided screws to fix hard disk on the rack inside and then replace the top cover of the case.
3.2 Connecting Camera and Monitor
There are 4/9 camera inputs and 2/1 Monitor outputs with BNC connectors (Refer to 2.2 Rear Panel).
3.3 VGA Output (optional)
There is 1 CRT or LCD monitor output with VGA port.
3.4 Connecting Power Supply
Please only use the power adapter supplied with the DVR.
Chapter 4: Starting the DVR
4.1 Firmware Version
After connecting the power adapter
and turning on the power button, the system
will boot-up and display the version and
released date of the DVR firmware.
V1.9
V-EN-BG
2008.2.23
