18
500-33530, Rev B
3. PEEL off the backing for the double-stick tape on the back of the
dress ring, and PUSH the dress ring onto the junction box.
NOTE:
It is recommended that the conduit be installed on the top and
bottom of the enclosure box for wiring and the battery be
installed horizontally.
4. ENSURE wire conduit is connected to the junction box with strain
relief.
NOTE 1:
The battery may be oriented in the junction box either vertically
or horizontally as long as the connection wires from the battery
and power supply module have a clear pathway to the
attached wire conduits.
NOTE 2:
If the included battery/battery-type is not used, fish paper must
be used to provide insulation for the installed battery.
5. INSTALL the battery into the junction box.
6. (Optional) REMOVE the power supply module from the cover to
ease in connection of wiring.
