9
500-33530, Rev B
Access Control
Input
DIP Switch Settings
Output
Access Dry
Contact State
Access DIP
Switch
Setting
Lock Type DIP
Switch Setting
LOCK
Output
Voltage
FAI LED
(RED)
Open NC
FSA
Off
Off
Open NC
FSE
On
Off
Closed NO
FSA
Off Off
Closed NO
FSE
On Off
Closed NC
FSA
On Off
Closed NC
FSE
Off Off
NOTE:
Because the lock circuit fails secure, listed panic hardware
shall be used to allow emergency exit from the protected
area.
The following table describes lock power output behavior when there is
an active fire alarm signal at the FAI input. This ensures the
door is
unlocked
when there is an active fire alarm signal. It should be noted
that the FAI signal will always override the access control signal.
FAI Signal
DIP Switch Settings
Output
FAI Dry Contact
State
FAI DIP
SW
Setting
Lock Type DIP SW
Setting
LOCK
Output
Voltage
FAI LED
(RED)
Open NC FSA
Off On
Open NC FSE
On On
Closed NO
FSA
Off On
Closed NO
FSE
On On
