secureView MDVR-J200, Quick Start Manual

Page: 10 / 16

8
MDVR-J200 Quick Start Guide
NOTE:
After account registration, you will be automatically prompted to bind
a device.
3.3.1 Adding Your Device
1. Open the main menu and press
Device List
.
2. Enter the 15-digit IMEI of your device which is printed on the box and on
the top cover of the camera. QR code scanning is under development
and will be available in later version.
3. Enter the number plate of the vehicle and a reference name for the device
and press Next .
3.3.2 Unbinding Your Device
1. Open the main menu and press Device List .
2. Press the device you want to unbind, then press Unbind .
3. Press OK
to confirm.
NOTE:
MDVR-J200 cameras can only be bound to one mobile phone at a time.
If you want to register the device on another mobile phone, you must unbind the
device on the original mobile phone first.
3.3.3 Device Settings
1. Open the main menu and press Device List .
2. Press the device you want to unbind, then press Settings .
Device List
3. From here, you can edit the Overspeed Alert, Driving Behaviour, Vibration Alert, LED and Voice settings of your
device.
Settingsmenu Overspeed Alert settings DrivingBehavioursettings Vibration alert settings
3.3 Binding Your Device to an Account