8 Menu Firewall
Securepoint 10
Securepoint
Security Solutions
67
8.1.1 Create Rule
Click
Appent Rule
to append a new rule.
The dialog
Add Rule
appears.
The rule will be created on the tab
General
.
Select in the field
Source
a source from the list.
Select in the field
Destination
the destination from the list.
Define in the field
Service
which service will be used.
Choose in the field
Action
if the access should be accepted or denied.
Select in the field
Logging
which logging mode should be used.
In the field
QoS
(Quality of service) you can limit the bandwidth.
At
Rule Routing
you can define which gateway should be used for packages of this
rule. For example: IPSec connections must always communicate over the same inter-
face. This setting is important if you use several internet connections.
Note
: For source and destination a network object must exist which defines the item
exactly. If it doesn’t exist you have to create it.
If the used service is not listed you can define a new one.
fig. 67 create new rule - tab general
