7 Menu Network
Securepoint 10
Securepoint
Security Solutions
52
7.2.2.3 Add Route
Routes offer the possibility to find networks which are not directly connected to the appliance.
To send a package to a network which is connected via a gateway (for example a router) to
the appliance, the system must be informed about this. Otherwise the packages will be
routed to the default gateway where they cannot be transmitted to the desired network.
Switch to the tab
Routing
and click
Add route
.
The dialog
Add Route
appears.
Select in the field
Type
if the route applies to all networks and computers or just for
several ones.
For all select
without Source
.
Otherwise select
with Source
and enter the IP-address and the subnet mask of the
concerned network or host in the fields
Source Network
and
Source Mask
.
Enter the
Gateway
, which should be used for reaching the destination network or
destination host.
In the fields
Destination Network
and
Destination Mask
enter the IP-address and
the subnet mask of the destination.
You can assign a weighting for the route in the field
Weighting
.
fig. 52 general route
fig. 53 route for defined sources
