Nnn-0000nn
© Copyright 2012 SecureALL Corporation
Page
7
of
22
All Rights Reserved
If it is necessary to change from a left hand inside opening lock unit to a right hand inside
opening lock unit (or vice versa), first follow the procedure above to reverse the latch bolt. The
locking side must then be reversed. Unscrew the two screws in the left figure below and put
them in the same screw holes on the other side of the chassis.
III. Installation Instructions for Left Hand, Inside Opening Door
1.
Orienting the Chassis Assembly (Item 2) as shown in Figure 1a, carefully thread the two
cables into the door pocket and through the second hole as shown in Figure 1b. Holding
the cables taut, push the Chassis Assembly all the way into the pocket.
Figure 1a
Figure 1b
