Secure Computing ADMINGUIDEREVA Manual Download

Page: 14 / 80

Requirements

1-4

Getting Started

Soft-PK requirements

Each system on which Soft-PK will be installed must meet the
requirements listed in Table 1-2

IMPORTANT:

A remote system must only run one VPN client. If a VPN client program

such as SecureClient was previously installed on the remote system, ensure it is properly
uninstalled. See Chapter 4, "Installing and Working with Soft-PK" for details.

Table 1-2. System requirements for running Soft-PK

Category

Requirement

Hardware

An IBM PC or compatible computer (portable or desktop)

with at least a 75 Mhz Pentium microprocessor (or
equivalent).

A non-encrypting modem (for use with dial-up

networking) or an Ethernet interface.

At least 10 MB of free hard disk space.

The recommended system RAM size:

—

Windows 95: 16 MB

—

Windows 98, NT: 32 MB

—

Windows 2000, Me: 64 MB

Software

Microsoft Windows 95, 98, Me, NT 4.0, or 2000

Professional.

Dial-up Networking component of Microsoft Windows

and/or Ethernet LAN interface.

If the remote system uses a modem, the end user must

have dial-up account with an Internet Service provider
(ISP) or a private corporate dial-up account.

TIP:

Instruct Soft-PK users to follow the instructions

provided by Microsoft to install Dial-Up Networking
on their Windows machine. Also, create a dial-up

networking profile for the ISP used to gain access to the
Internet.

Microsoft Internet Explorer 4.0 or later (for using help)

Summary of Contents for ADMINGUIDEREVA

















































































Search results

Summary of Contents for ADMINGUIDEREVA

Reviews:

Related manuals for ADMINGUIDEREVA

Brands by name

Popular brands

Secure Computing ADMINGUIDEREVA, Manual

Search results

Summary of Contents for ADMINGUIDEREVA

Reviews:

Related manuals for ADMINGUIDEREVA

Brands by name

Popular brands