6
Note: First Administrator must have a code
–
Code length must be between 4 to 8 digits.
o
Lock will say “Enter new code followed by check mark”
–
enter a unique code between 4
and 8 digits in length, followed by
button
o
Lock
will ask you to repeat the code entry: “
Repeat new code”
–
enter the same code
again followed by the
button
o
Lock will confirm successful code saved by saying “Operation successful”
IMPORTANT: this new code is the Administrator code. It replaces the default Administrator
code 123456. This code would be used to pair the lock and app.
o
To add other Users, follow the same process as above.
o
Additional Users may be enrolled as either Owners (by placing a finger on the finger
printer reader) or Visitors (by selecting 0).
Note: Owners will be listed as Family in the App. Visitor access may be disabled or
restricted in the app.
II. Pair Lock to the SECURAM Guard App on your mobile device: The SECURAM Guard app will allow
you to manage your EOS Lock.
Press the Function
button to begin:
Pair phone press 8
o
Pairing Mode
o
Please log in as Administrator
o
Verified successfully
o
Now please follow the instructions on the app to complete the setup
III. Lock Operation
Unlocking
o
Place fingerprint on sensor
or
o
Enter code and press
or
o
Use override key
Locking
o
Press any number or push the lock button (bar button under the number pad)
Auto Lock
–
the lock can be set up to automatically lock after opening. This feature can be set
up in the app.
o
When the scheduled auto lock time elapses, the system extends the lock bolt
Remote control from app
o
Locking and Unlocking
o
Managing users- add, delete, schedule visitors, disable, enable.
