ProLogic L01-C
Operation Instructions
14
6.1 Encryption Key Set
The ProLogic L01-C sends and receives data to the lock in an encrypted form. This is a security measure
to ensure that all data is protected. The Encryption Key is set during the manufacturing process with a
default encryption key value. This value can be changed using the Encryption Key Set menu selection.
**Note: If the Encryption Key is changed from the default setting, this value must be maintained, as it is
a vital element to communicate with the lock inside the safe.
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
to the menu selection “Encryption Key Set” and Press OK.
Step 5: Enter existing Encryption Key.
Step 6: Enter new Encryption Key value.
Step 7: Repeat new Encryption Key value.
7.0 Recovering the System – Reset to Default
The ProLogic Series safe lock systems have the ability to be reset to factory default settings using a very
unique secure method. Each system has a default recovery code. The Default code is 999999 - this
code can be changed as necessary (refer to the Recovery Code Set selection).
Upon entry of the recovery code, the LCD screen displays an alpha-numeric code. This code cannot be
used to open the safe lock system or to change the code to factory default. The alpha numeric code
must be deciphered using SecuRam’s Authorization Code Generator Software.
The alpha-numeric code is entered into the software together with the encryption code. Through the
software, these codes are deciphered to generate a One Time Use Reset Code.
When entered into the ProLogic safe lock, the lock and EntryPad are reset to factory default and the
system is recovered. Once used, the OTC (One Time Code) is no longer valid.