ProLogic L01-C
Operation Instructions
11
3.6 Obfuscate Code Entry
This feature would be used in order to obfuscate the code as it is entered on the LCD screen.
In normal operation, as the user enters the code, the digit of the code pressed is visible on the LCD until
the next digit is entered. The prior digit turns to an “*”.
With the Obfuscate Code Entry feature, every digit that is entered is displayed as an “*” immediately
upon entry, so that your code is always obscured from view on the LCD.
To Obfuscate Code Entry, follow this procedure:
Step1: Press the Menu/OK button.
Step 2: Using the
and
, scroll to the System Menu and Press Menu/OK.
Step 3: The display will prompt you to enter a valid code. Enter either the Super Code (ID00) or
the Manager Code (ID01). The “Select Menu” message will be displayed as follows:
Step 4: Scroll
and
to the menu selection “Obfuscate Code Entry” and Press OK
All digit entries will now be display as “*” immediately upon entry.
To revert from this mode, follow the same process but select “Show Code Entry”.
4.0 System Info - System Identification
This menu feature would be used to determine the type of safe lock system being used. Many of the
SecuRam ProLogic EntryPads look the same, but the features sets and capabilities vary greatly
depending upon the software being utilized. To determine the type of ProLogic Safe Lock system, follow
this process:
4.1 System Info:
Step1: Press the Menu/OK button.