ProLogic B22
Operation Instructions
18
Upon entry of the recovery code, the LCD screen displays an alpha-numeric code. This code cannot be
used to open the safe lock system or to change the code to factory default. The alpha numeric code
must be deciphered using SecuRam’s Authorization Code Generator Software.
The alpha-numeric code is entered into the software together with the encryption code. Through the
software, these codes are deciphered to generate a One Time Use Reset Code.
When entered into the ProLogic safe lock, the lock and EntryPad are reset to factory default and the
system is recovered. Once used, the OTC (One Time Code) is no longer valid.
There is no limit to the number of times a system can be recovered using this process.
This is a vast improvement over other commonly used reset functions, as it offers a very secure recovery
method.
9.1 Recovery Code Set
The default Recovery Code for the ProLogic Series is 999999. It is not necessary to change this code, but
if preferred, this code can be changed with the following procedure.
Step1: Press the Menu/OK button
Step 2: Press the "
▼
" button to the menu selection “Recovery Code Set” and press Menu/OK
Step 3: The display will prompt you to enter the recovery code (default 9 9 9 9 9 9)
Step 4: The LCD screen will display a key Code. Record this number and call an authorized
SecuRam Recovery Center or SecuRam Tech Support at 1-805-988-8088 for an Authorization
Code. (This code remains valid for a period of 20 minutes only).
Step 7: After receiving the One Time Use Authorization Code from the Recovery Center, press
the “back” button; and you will be prompted to enter your Authorization Code.
Step 8: Next you will be prompted to enter your new 6 digit Recovery Code.
