Secura Key RADIO KEY 600, Quick Start User Manual

Page: 3 / 4

(Mode No. 2) (MODE) (ENTER)
(5 Seconds)
(SET
TIMER)
(ENTER)
(Re-type New Password - 54321)
(ENTER)
(New Password - 54321)
(PIN Number 3253)
(User Number 14)
(ADD)
(ENTER)
(ADD)
(ID Number 995)
(VOID) (ENTER)
Delete a Transponder by Entering Transponder ID: Delete a Transponder by Entering Transponder ID:
Delete a Transponder by Entering Transponder ID: Delete a Transponder by Entering Transponder ID:
Delete a Transponder by Entering Transponder ID:
(RKCM-01 cards or RKKT-01 Tags Only)
Enter Password. Press ENTER. Press VOID , Press * , enter the ID number
engraved on the Transponder, then press ENTER . A green light and beep means
the Transponder was deleted.
+ + 9 + 9 + 5 +
Add a PIN to the System: Add a PIN to the System:
Add a PIN to the System: Add a PIN to the System: Add a PIN to the System:
Enter Password. Press ENTER. Press ADD , enter the User Number, press ADD ,
enter the 4-digit PIN Code, then Press ENTER .
+ 1 + 4 + + 3 + 2 +
5 + 3 +
Change your Password: Change your Password:
Change your Password: Change your Password:
Change your Password:
Enter your current Password. Press ENTER. Press * , then enter the new Password
(exactly 5 digits). Press * again, then re-enter the new Password and press ENTER. A
green light and beep means the Password was changed. Note that 12345 is the
default (factory) password; use another number sequence for best security.
+ 5 + 4 + 3 + 2 + 1 +
+ 5 + 4 + 3 + 2 + 1 +
Set the Latch Timer: Set the Latch Timer:
Set the Latch Timer: Set the Latch Timer: Set the Latch Timer:
Enter Password. Press ENTER. Press SET TIMER . Enter the number of
seconds (0-30). Press ENTER . A green light and beep means the Latch Timer
setting was changed.
+ 5 +
Set the Operating Mode: Set the Operating Mode:
Set the Operating Mode: Set the Operating Mode: Set the Operating Mode:
Enter Password. Press ENTER. Press MODE , then press 1 , 2 or 3 and press
ENTER. The Access Control Unit will exit Programming Mode and enter the
selected Mode. Selections are:
1. Active (Normal) -- LED is Off
2 . Inactive (Reader Disabled)-- LED blinks Red
3 . Door Unlocked -- LED blinks Green
+ 2 +