(User Number 12)
(VOID)
(ENTER)
(VOID)
(ENTER)
(Starting User No. 1)
(Ending User Number
10)
(VOID)
(ENTER)
(Starting User No.
1)
(Ending User Number
10)
(ADD)
(ENTER)
(ID Number 995)
(User Number 12)
(ADD)
(ENTER)
Add a Transponder by Entering Transponder ID:
Add a Transponder by Entering Transponder ID:
Add a Transponder by Entering Transponder ID:
Add a Transponder by Entering Transponder ID:
Add a Transponder by Entering Transponder ID:
(RKCM-01 cards or RKKT-01 Tags Only)
Enter Password.
Press
ENTER
. Press
ADD
, enter the User Number, press
*
,
enter the ID number engraved on the Transponder, then press
ENTER
.
+ 1 + 2 +
+ 9 + 9 + 5 +
In either case, be sure to record the User Number and Name and Transponder ID
Number in the User Log Form.
Add a Series of Transponders to the System:
Add a Series of Transponders to the System:
Add a Series of Transponders to the System:
Add a Series of Transponders to the System:
Add a Series of Transponders to the System:
Enter Password.
Press
ENTER
.
Press
ADD.
Enter the Starting User Number
in the range. Press
*
, enter the Ending User Number, press
*
, then press
ENTER
.
Present the Transponders to the reader in the desired order (making a careful
record of which Transponders are assigned to which User Numbers.) If one or more
Transponders are already entered into the User Number range you have selected,
a red light and three beeps will occur, in which case, you must delete the entire
range before proceeding.
+ 1 +
+ 1 + 0 +
+
Delete a Transponder from the System:
Delete a Transponder from the System:
Delete a Transponder from the System:
Delete a Transponder from the System:
Delete a Transponder from the System:
Enter Password.
Press
ENTER
. Press
VOID
. Enter the User Number. Press
ENTER.
A green light and beep means that the Transponder was deleted.
+ 1 + 2 +
Delete a Range of Transponders from System:
Delete a Range of Transponders from System:
Delete a Range of Transponders from System:
Delete a Range of Transponders from System:
Delete a Range of Transponders from System:
Enter Password.
Press
ENTER.
Press
VOID
. Enter the Starting User Number
in the range, press
*
, enter the Ending User Number, then press
ENTER.
A green
light and beep means the range of Transponders was deleted.
+ 1 +
+ 1 + 0 +
Delete a Transponder by Presenting to Reader:
Delete a Transponder by Presenting to Reader:
Delete a Transponder by Presenting to Reader:
Delete a Transponder by Presenting to Reader:
Delete a Transponder by Presenting to Reader:
Enter Password.
Press
ENTER.
Press
VOID
, then press
ENTER
. Hold the
Transponder near the RK600 Unit. A green light and beep means the Transponder
was deleted.
+
(Hold Key Tag near Unit)
