Seculux MANAGER DCS, Manual

Page: 30 / 66

MANAGER DCS 2.0X I
30
In order to save a copy of the installation in the memory
cartridge, use the
or keys to locate the menu:
Press
. The following message will appear:
Using the or keys, select the number of the sector where the installation
is to be saved. If another installation is already saved in this sector, the Portable
Programmer will indicate this on the screen by means of the abbreviations
Rc
if it
is a receiver installation, Mn if it is a Mini-A.C., or Mx if it is a Maxi-A.C. In a sector
with the letters
Rc
, only receiver installations may be stored, and similarly with the
indications Mn and Mx.
Press to access the screen that enables the selection
of the installation number where the installation being
configured is to be stored. This number can be selected by
using the
or
keys.
If the number is already occupied, it will be accompanied by the
symbol #. In this case, you must decide whether to overwrite the
previously stored installation or select a different number.
Press . The following message will appear momentarily:
Followed by:
The Programmer will automatically return to the Receiver
Menu/Edit .
Switch off the power supply of the Portable Programmer, remove the memory card
and insert it correctly in the receiver (remembering that this must be switched off).
The installation is completed.
It is very important to note down the installation number and the sector of
the memory cartridge where it has been stored, together with the position
number and the code of each transmitter, in order subsequently to be able
to maintain the installation efficiently.
•
Installing a Mini-A.C. Unit
If the type of receiver element to be used is a Mini-A.C.,
select the
Mini-A.C. Unit menu using the direction keys
or
.
Once selected, press . The
Mini Unit Menu/Edit
will
appear on the screen: .
Press again. The following message will appear: