Seculux MANAGER DCS, Manual

Page: 28 / 66

MANAGER DCS 2.0X I
28
To create the installation, proceed as follows:
Switch off the power supply to the receiver apparatus (Micro-Receiver, Single-
Channel Receiver, Control Panel Receiver Card, Mini-A.C. or Maxi-A.C.) and
remove the corresponding memory card. (Consult the manual of the receiver).
In the MANAGER DCS, insert the memory cartridge into the corresponding slot
(see figure on page 6, no. 3), the transmitter adapter (9) in slot number 8, and the
memory card in slot number 4 in the case of a Receiver or Mini-A.C. or in slot
number 5 in the case of a Maxi-A.C.
•
Installing a Receiver
If the type of receiver element to be used is a Micro-
Receiver, a Single-Channel Receiver or a Control Panel
Receiver Card, select the
Receiver menu using the
direction keys or
.
Once selected, press . The following message will
appear:
Press 1 or 2 depending on the type of memory to be used,
and the following screen will immediately appear
Press again. The following message will appear:
Press the and keys simultaneously. A message
will appear on the screen requesting the number of
transmitters to be stored.
Enter the quantity by means of the numerical keys (e.g. 3).
Press
. The following message will appear:
Insert the transmitter into the transmitter connection adapter (see figure on page
6, no. 9) and press any button of the transmitter.