Seculink 1004Z User'S Installation And Operation Manual Download Page 39

Page: 39 / 95

第

页

Note

：

FTP upload need be set at [Netservice]

【

Buzz

】

When alarm happens, device will come out with buzz.

4.3.2 Video Blind

When the video image is influenced by the environment such as bad brightness or reaching the set

sensitivity parameter, the camera mask function is turned on and the linkage function is turned on.

*Same as motion detect function, video blind is different between Hybrid mode & Full digital

mode:

Digital channel: not only to enable video blind function at local side, but also to enable the remote

device that was connected. when remote device with video blind, local side will start alarm

recording, otherwise this function is not enable.

Hybrid mode: only need to enable video loss function at local side.

Note

: "Advanced" button is the same as right click.

Video Blind in Hybrid mode

Summary of Contents for 1004Z
































































































Search results

Summary of Contents for 1004Z

Reviews:

Related manuals for 1004Z

Brands by name

Popular brands

Seculink 1004Z, User'S Installation And Operation Manual

Search results

Summary of Contents for 1004Z

Reviews:

Related manuals for 1004Z

Brands by name

Popular brands