Seculink 1004Z User'S Installation And Operation Manual Download Page 38

Page: 38 / 95

第

页

【

Interval

】

Only one alarm signal is turned on even there are several motion detect signals in the set

interval.

【

Alarm output

】

Start the external equipment of corresponding linkage alarm when the motion detect

alarm is turned on.

【

Delay

】

Delay a few moments and stop when the alarm state is turned off. The range is 10~300

seconds.

【

Record channel

】

Choose the recording channel (multiple option supportive). Trigger the video

signal when the alarm is turned on.

Note:

Set in the [recording setup] and perform the linkage recording. Start detecting video files

in the corresponding time section.

【

Tour

】

■ means that the selective channel is single window alternate patrol preview. The interval is

set in the [Main Menu]>[System] > [Tour].

【

PTZ Activation

】

Set the PTZ activation when the alarm is turned on.

*Hybrid mode, PTZ link to the related PTZ information of analog channel, While digital

channel model, the PTZ is link to the related PTZ information on the remote device connected.

Note

：

to link PTZ, need go [Shortcut menu]->[PTZ control] to set preset point, cruise between

points & interval time, etc.

Picture 4.7 PTZ Activation under hybrid mode

【

Delay

】

When alarm is over,recording will last some seconds(10~300sec),then stop.

【

Show message

】

Pop the alarm information dialog box in the local host computer screen.

【

Send EMAIL

】

■ means sending an email to user when the alarm is turned on.

Note:

Set in the [NetService] and send email.

【

FTP upload

】

to tick it, the video & picture of related record channel & snapshot channel will be

uploaded to assigned position.

Summary of Contents for 1004Z
































































































Search results

Summary of Contents for 1004Z

Reviews:

Related manuals for 1004Z

Brands by name

Popular brands

Seculink 1004Z, User'S Installation And Operation Manual

Search results

Summary of Contents for 1004Z

Reviews:

Related manuals for 1004Z

Brands by name

Popular brands