Sectron GSM Key LITE 3 Instructions For Use Manual Download Page 8 | Manualshive

Page: 8 / 39

background image

8

INSTALLATION AND GETTING STARTED



When installing the device, pay increased attention to work safety.

1.

The device must only be installed by a qualified and properly trained person.

2.

Before you start installing the device and before you put it into operation, please read
this manual carefully.

3.

If you use a power supply to charge the device, it must comply with requirements for
placing SELV circuits; also, it must comply with EN60950. The power supply, which is a
part of the package, complies with such requirements. If batteries or accumulators are
used, these must also comply with relevant standards.

4.

Should you have any questions, do not hesitate to contact your installation company or
SECTRON Hotline ([email protected], +420 599 509 599).

To install the device, you will need pincers.

Insert the SIM card which you want to use in the GSM KEY in the mobile phone.

Call your mobile phone provider to activate the SIM card, delete the PIN, voicemail,
your contacts list and SMS messages.

«
...
6
7
8
9
10
...
»

Summary of Contents for GSM Key LITE 3








































Reviews:

No comments

Related manuals for GSM Key LITE 3

Brand: Nabco Pages: 3

Brand: Nabco Pages: 30

Brand: Wayne-Dalton Pages: 18

Brand: Guardian Pages: 22

Brand: Chamberlain Pages: 40

Brand: CAME Pages: 96

Brand: CAME Pages: 112

Brand: GDS Pages: 15

Brand: Power Drive Pages: 40

Brand: Power Drive Pages: 36

AXOVIA 180 B NS

Brand: SOMFY Pages: 12

Brand: SOMFY Pages: 24

Brand: SOMFY Pages: 24

Brand: Dea Pages: 20

Brand: Dea Pages: 80

Brand: CAME Pages: 36

Comfortpull 21141

Brand: Trebs Pages: 9

Brand: Dahua Pages: 29

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands