Digital Video Recorder
DVR Menu
24
Port: Port number of the mail server.
User name: User name of the sender’s mail.
Password: Password of the corresponding user name.
Receiver: The warning information can be sent to the designated
receiver via mail, three recipients can be set up.
Sender: Setting the EMAIL address of the mail sender.
Interval: Interval for sending the alarm mail.
Default: Setting all the parameters in the Email Setup interface to be
default.
Save: Saving the parameters in the Email Setup interface.
Return: Going back to the former management interface.
5.3.3.5 Video Detection
Click “Motion Detect” icon under “Sys Setup”, switch to interface as
Picture 5-16 shows. When the system detects a mobile signal reaches a
preset sensitivity occurs, motion detection alarm and the linkage function
will be initiated by analyzing the video image.
Picture 5-17
Type
：
video detection including motion detect alarm and Video loss
alarm.
Channel No: Select the motion detection channel. 2 option: Single and
All), for the Single channel, you need to choose the particular channel.
ON/OFF
：
☑
open video detection function.
Sensitivity: 7 values can be set for the sensitivity.
System locale
：
Set the trigger video detection area.
Buzzer on
：
☑
Open Buzzer
Smtp Enable
：
☑
open mail alarm, system send mail when alarm occurs,
for example, alarm event, capture picture, device name and device
ID.
