Seco SX-600 User Manual Download

Page: 13 / 79

3 Basic Operations

This section covers the basic operations of the DVR, including using the

Menu Bar

Logging

to the DVR, and opening the

Main Menu

3.1

Live View:

Live view is the default screen that is displayed on your DVR. This displays your cameras,

the time and date, as well as the recording status and menu bar. It is important to check your
DVR regularly to make sure it is recording properly:



“ ” on a camera image means the camera is recording continuously.



“ ” on a camera image means the camera is recording on motion or alarm.



“ ” on a camera image means this channel is currently detecting motion.



“ ” on the screen means audio is enabled.



“ ” on the screen means audio is disabled.

3.2

The Menu Bar:

The

Menu Bar

is a bar with buttons that will display at the bottom of the live viewing

screen. To hide or show the

Menu Bar

you must right click the screen with the mouse. The

functions of the

Menu Bar

are listed below:

4 5 6 7 8 9

Summary of Contents for SX-600
















































































Search results

Summary of Contents for SX-600

Reviews:

Related manuals for SX-600

Brands by name

Popular brands

Seco SX-600, User Manual

Search results

Summary of Contents for SX-600

Reviews:

Related manuals for SX-600

Brands by name

Popular brands