6
2.
RECEPTION OF YOUR DEVICE
2.1.
Taking delivery
The device you have received has been controlled and tested in our plant according to ISO9001 specifications.
If the equipment has been stored or transported under unacceptable conditions, the equipment may be permanently damaged. In
this case the manufacturer will exclude all warranty claims and obligations.
2.2.
Accessories, spare parts and options
This paragraph shows the most common accessories for this device. Please refer to the latest Machining Navigator ‘Tooling
Systems’ or latest Update for further information.
2.2.1. Universal sliding support
Designed for easy and safe displacement of the toolhoder from the shrinking slot to the cooling slots of the device.
Part N° ZFAR08T
2.2.2. Support ring
Once set on the universal sliding support, the support ring allows a direct holder positioning. Available for all types
of toolholders (SA30 to SA50, HSK25 to HSK100, Seco-Capto C3 to C8). Part N° ZFAR07xx
2.2.3. Air cooling cone
Once set on the universal sliding support, the air cooling cone focuses the air stream against the holder front end for
cooling. Part N° ZFAR03C
2.2.4. Heat focusing stopper
For positioning of the inductor housing.
Part N° Standard stoppers: ZFAT08Cxx
Part N° Split heat focusing stoppers: ZFCE252x
Part N° Locking ring for split heat focusing stoppers: ZFCM08IN000
2.2.5. Depth comparator
User friendly measuring accessory to set the position of the stop end screw (for DIN type holders), for
reliable Shrinkfit depth. The distance between the stop end screw’s front and the holder’s front face is directly
readable on the comparator.
Part N° Z847031
Split
stopper
Standard
stopper
