2.2
Technical Specifications
Supported Modules
COM Express Type 7 compliant modules
Mass Storage interfaces
2x SATA 7p M connectors
µ
SD Card slot (interface multiplexed with GPIO header)
Networking
1x RJ-45 connector
4x 10Gbase-KR interfaces on OCP Type-C connector
4x MDIO / I2C interfaces on internal pin header
4x SDP interfaces on SMA RF connectors
USB
4 x USB 3.1 Host ports on Dual Type-A sockets
PCI-e
2x PCI-e x4 Slots
1x PCI-e x8 Slot
1x PCI-e x16 Slot
Serial Ports
2 x RS-232 ports on dedicated pin header (from module)
Other Interfaces
BMC connector with SM Bus, I2C, LPC, 1x USB 2.0, 1x PCI-e x1, NCSI signals
4 x GPI + 4 x GPO pin header (interface multiplexed with µSD slot)
SPI Flash Socket
Button / LEDs front panel header
4-pin tachometric FAN connector
I2C + SM Bus on feature Pin header
I2C Flash Socket
SM Bus Smart Battery Connector
4 x 7-segment LCD displays for POST codes
LPC/eSPI internal header
USB Overcurrent header
JTAG connector
FuSa header
SPI Flash header
Buzzer
Power supply:
ATX 24 poles connector for carrier board working only
Auxiliary 12V connector for carrier board working only
12 V
DC
power in connector for COM Express
Coin-cell holder for RTC
Operating temperature:
0°C ÷ +60°C * (Commercial version)
Dimensions:
305x244mm (
* Temperature ranges indicated mean that all components available onboard
are certified for working with a Tcase included in these temperature ranges.
This means that it is customer
’
s responsibility to ensure that all components
’
Tcases remain in the range above indicated. Please also check paragraph
4.1.