background image

14

ENFORCER Access Control Keypad with Proximity Card Reader

SECO-LARM U.S.A., Inc.

Programming the Super User Code:

The super user code has multiple functions:

 

The super user code can activate or deactivate output #1, output #2, and output #3 at any time.

 

The super user code can toggle operation of output #1 on or off. 

 

The super user code can pause or restart the timed output #1 auto-disable period.

 

The super user code can enable or disable output #1.

 

The super user code is exempt from any system inhibition or lockup functions. It is valid at  

any time.

Programming the Super User Code:

1. 

Make sure the keypad is in programming mode (see “Enter and Exit Programming Mode” on 

page 11).

2. 

Enter the new super user code:

02 xxxx #

NOTE

:

 

XXXX

 represents the new super user code, which can be 4 to 8 digits long.

 

There can be 

only one super user code

 for the keypad.

 

Programming a new super user code will overwrite the previous super user code.

 

The 

master

super user

common user

visitor

duress

, and

 user codes

 

cannot

  

be the same. 

Deleting the Super User Code:

This function is useful for protecting the premises in case the super user code is forgotten.
To delete a super user code:
1. 

Make sure the keypad is in programming mode (see page 11).

2. 

Enter:

02 #

Using the Super User Code:

In these examples, assume the super user code is 

2580

.

1.  Activate or deactivate output #1 (timed or toggle, depending on programming):

2580 # 1

2.  Activate or deactivate output #2 (timed or toggle, depending on programming):

2580 # 2

3.  Activate or deactivate output #3 (timed or toggle, depending on programming):

2580 # 3

Summary of Contents for SLI ENFORCER SK-1131-SPQ

































Reviews: