sPress2 Fingerprint
Standalone Access Control User Manual V1.0
Sebury Technology Co., Ltd
http://www.sebury.com
12
02, 0#, delete 3 Set-cards(or fingerprint).
02, 1#, delete 3 Add-cards(or fingerprint).
02, 2#, delete 3 Delete-cards(or fingerprint).
02, 3#, delete 3 Super-open-cards(or fingerprint).
02, 4#, delete 3 Anti-duress-cards(or fingerprint).
02, 5#, delete 3 Authorization-cards(or fingerprint).
02, 6#, delete 3 Normal-open-cards(or fingerprint).
4.1.4 Set Machine Mode
03, 0#, Set to Reader mode.
03, 1#, Set to Single-door mode.
03, 3#, Set to Interlock mode.
03, 9#, Set to Demo mode.
Note: Factory default mode is Single-door mode.
4.1.5 Limit types of reading card
04, 0#, cannot read any card.
04, 1#, can read EM card only.
04, 2#, can read HID card only.
04, 3#, can read IC card only.
04, 4#, can read EM+HID card.
04, 5#, can read EM+IC card.
04, 6#, can read HID+IC card.
04, 7#, can read EM+HID+IC card.
4.1.6 Restore to default settings
09
，
0000#
Note: After Restore to default settings, Admin Password is unchanged, Machine mode is
unchanged, admin cards and user card information are not deleted, and the specific default
values are shown in the appendix.
