Mode 2: Wiegand 4Bit button code, Wiegnad 8Bit button code, Wiegand26-37Bit Card No without even/odd check digits.
Keep pressing button SW6 for 8-10 digits card number switching, then turn the "power switch" SW7 from "off" to "on",
release button SW6 after two beeps, the digital tube displays "E-- o" or "----", initialization completed.
"E--o" indicates device is in mode 1, and "----" indicates mode 2.Each initialization will change the mode in turn. Power off
have no impact on the mode.
3.3.2 Card Reader Setting
Currently, card reader models can be set by sGuard are: R1/2/3/4 Series, mReader, sReader. Function test is applicable for
other models card readers instead of setting up.
Press Card reader set up key
“
SW5
”
once then release, the card reader indicator wills turn into orange and LED10 light will
turn on. For example, if the tube indicator display
“
01-14-26
”
, the front 2 digits start from 00-02, the middle 2 numbers
range from 10-14 and the last 2 name between 26-37 (for Mode 1) or 27-35 (for Mode 2). Input numbers on the touch
numeric keyboard. Press
“
*
”
to delete the last input number so the digits displaying as the above example conforms with
the range, such as
“
01-14-26
”
. Then press
“
#
”
, the card reader gives 3
“
DI-, DI-, DI-
”
long rings. It means setting up succes
sfully. Also the card reader
’
s indicator light turns into red and gets back to regular working state with sGuard
’
s LED9 green light on. The configures can be saved when power is off and maintain to next time use when power on.
The values input can be empty, repeated or exchange their positions. Take
“
01-14-26
”
for example. We can set up only one
or several values or repeat the setting several times. The last setting will be effective. Input the values into the card reader
in sequence, separately, no need in particular order. Such as "01-14-26", "1-14-26", "- 26-14", " - - 26", "26-14-34 " are all
legal. If input "26-32-34 ", the result of set up is 34 Bit card number output.
Meaning of setting value
Key format selection (card reader with password keyboard):
00: 4-6 digit password is output in the format of card number
01: 4Bit single button output
02: 8Bit single button output
Card type selection
10: Read EM card
11: Read HID card
12: Read EM and HID cards.
Summary of Contents for sGuard
Page 1: ...sGuard User Manual...
