B6K2 Standalone Access Controller User Manual V1.0
NetDigital Security
17
The zone 1 valid menus for Double-doors mode are: 00-04,09,10-12,20-22,30-36,40-45,50-57.
The zone 2 valid menus for Double-doors mode are: 00,01,02,10-12,21,22,30-36.
The valid menus for Demo mode are: 03,09,32,34,51-53,55.
4.1.6 Limits types of reading card
04, 0#, cannot read any card.
04, 1#, can read EM card only.
04, 2#, can read HID card only.
04, 3#, can read IC card only.
04, 4#, can read EM+HID card.
04, 5#, can read EM+IC card.
04, 6#, can read HID+IC card.
04, 7#, can read EM+HID+IC card.
Note: Whether you can read a card is determined by the specific model and the codes above.
4.1.7 Restore to default settings
09, 0000#
Note: After Restore to default settings, Admin Password is unchanged, Machine mode is unchanged, admin cards and user
card information are not deleted, and the specific default values are shown in the appendix.
4.1.8 Add User
4.1.8.1 Automatically generates ID numbers to add user card
Read card continuously to add user:
10, read card, read card, …
Input 8-digit format card number to add user
10, 8# (8-digit format card number) #, 8# (8-digit format card number) #, …
Input 10-digit format card number to add user:
10,10# (10-digit format card number) #, 10# (10-digit format card number) #, …
Note: For example, card number is: 0004301875, 065,42035, front numbers are 10-digit format card number, the following
numbers are 8-digit card number, 00 in front of number can be omitted, you can input 4301875 or 65,42035. The card
number not separated by commas or other symbols is considered as 10-digit format card number. The following sections are
dealt with according to this rule.
4.1.8.2
Specify ID number to add user card or PIN
Specify ID number and read card to add user:
11, (ID) #, read card, (ID) #, read card, …
Specify ID number and input 8-digit card number to add user:
