B6K2 Standalone Access Controller User Manual V1.0
NetDigital Security
15
User PIN status.
3.7 Exit Management menu operation mode
In Management menu operation mode, press * more than once until the indicator light turn to red and always bright means
exit Management menu operation mode.
3.8 User open door
When the indicator light is red and always bright, read card, or (input user PIN) #, or press exit button.
Note: When the door opens, there is a long "beep" sound and the indicator light turns to green when the door is unlocked.
4.Basic Functions
4.1 Management menu operations
In all modes, enter the first zone management menu, the management system settings and the first zone related settings’
steps are:
* key (Hold on for more than 2 seconds), (Admin Password)#
or to read zone 1 Set-card
Note: Admin Password is 6 digits, 888888 is the factory default admin password. User should change the Admin Password
when use the device for first time, otherwise user cannot continue other operation. If the Admin Password is correct, the
indicator light will turn to green once and then back to red flash status. Other operations must be performed in this status. If the
user forget the admin password or user need to use the management menu for many times can use this method by read the
first zone Set-card operation instead.
In double door mode, enter the second zone management menu to
manage the settings only related to the second zone, the
steps are:
* key (Hold on for more than 2 seconds), (Admin Password)#
or to read zone 2 Set-card
Note: Add number “2” in front of 6 digit of zone 1 Admin Password, it will leads user into zone 2 management menu, if the
Admin Password is correct, the indicator light will turn to blue and then back to blue flashing status. Other operations must be
operated under this status. If the user forget the admin password or user need to use the management menu for many times
can use this read the zone 2 Set-card operation instead. There are only below menu numbers are effective in the zone 2
management menu: 00, 01, 02, 10-12, 21, 22, 30-36.
4.1.1 Change Admin Password
00,(New Admin Password)#,(Repeat Admin Password)#
